How to Change Battery in Jeep Key Fob

If you own a Jeep, chances are you have a key fob that controls various functions of your vehicle. Over time, the battery in your key fob will start to wear down and will need to be replaced. Luckily, changing the battery in your Jeep key fob is a relatively easy process that can be done at home with just a few tools.

In this article, we’ll walk you through the steps on how to change battery in Jeep key fob.

Jeep Key Fob battery replacement Compass / Renegade / Liberty / Cherokee / Grand Cherokee

• Locate the battery cover on the back of the key fob
• Remove the battery cover by prying it off with a small flathead screwdriver or by popping it off with your fingers
• Take out the old battery and dispose of it properly
• Insert a new CR2032 coin cell battery into the key fob, making sure that the positive (+) side is facing up
• Replace the battery cover and snap it into place

Jeep Cherokee Key Fob Battery Replacement

If you own a Jeep Cherokee, chances are you’ve had to replace the battery in your key fob at some point. If not, you will eventually. Replacing the battery in your key fob is a simple process that only takes a few minutes.

Here’s a step-by-step guide to replacing the battery in your Jeep Cherokee key fob: 1. Start by removing the screw from the back of the key fob using a small Phillips head screwdriver. 2. Pry open the back of the key fob with a small flathead screwdriver or knife.

Be careful not to damage the plastic casing. 3. Remove the old battery and insert a new CR2032 battery in its place, making sure that the positive (+) side is facing up. 4. Snap the back of the key fob closed and replace the screw.

Credit: www.raybrandtchryslerdodgejeep.com

How Do You Change a Battery in a Jeep Key Fob?

If your Jeep key fob has a dead battery, changing it is a fairly simple process that you can do at home. Here’s what you’ll need to do: 1. Start by removing the key fob from your key ring.

Most Jeep key fobs have a small release button on the back that you can press to detach the fob. 2. Once the key fob is detached, take a look at the back and locate the small screw that holds the battery cover in place. Use a Phillips head screwdriver to remove this screw.

3. With the screw removed, you should now be able to pry off the battery cover with your fingers or a flathead screwdriver. Be careful not to break the cover as you’ll need it to reassemble your key fob later on. 4. Underneath the battery cover, you’ll find the old battery which will likely be a CR2032 coin cell battery.

Remove this battery and dispose of it properly (do not just throw it in the trash!). 5. To insert the new CR2032 coin cell battery, simply place it positive side up into the compartment and make sure it snaps into place securely. You may need to use tweezers or needle-nose pliers to help guide it into place if it’s being stubborn.

What Kind of Battery Does My Jeep Key Fob Take?

The Jeep key fob uses a CR2032 battery. This type of battery is also known as a coin cell battery. TheCR2032 is a 3 volt lithium coin cell battery.

It’s diameter is 20 mm and it’s thickness is 3.2 mm. This particular type of battery is used in many different applications such as calculators, car keys, remote controls, and more. When choosing a replacement battery for your Jeep key fob, be sure to select a CR2032 that is made by a reputable company.

How Do You Change the Battery in a Jeep Grand Cherokee Key Fob?

Assuming you have a Jeep Grand Cherokee key fob with a removable battery cover, the process is as follows: 1. Start by prying off the battery cover with a flathead screwdriver. Be careful not to damage the plastic casing.

2. Inside, you’ll see a small watch battery (CR2032). Remove this and replace it with a new one. 3. Put the battery cover back on and snap it into place.

That’s it!

How Do You Change the Battery in a 2018 Jeep Key Fob?

In order to change the battery in your 2018 Jeep key fob, you will need to follow these steps: 1. Start by removing the key from the ignition. This will prevent any accidental activation of the key fob while you are working on it.

2. Locate the small slot on the back of the key fob. This is where you will insert a flathead screwdriver or other thin object in order to pry open the casing. 3. Once you have pried open the casing, take out the old battery and replace it with a new CR2032 coin cell battery.

Make sure that the positive (+) side of the new battery is facing up when you insert it into the key fob. 4. Close up the casing and test out your new battery by pressing any of the buttons on your key fob. If everything is working properly, then you are all set!

Conclusion

If you own a Jeep, it’s likely that you’re familiar with the key fob. The key fob is a small, handheld device that allows you to remotely unlock and lock your Jeep doors. It also has a panic button that will emit a loud noise if pressed, which can be helpful in an emergency situation.

Over time, the battery in your key fob will begin to die and will need to be replaced. Luckily, this is a fairly easy process that can be done at home. To replace the battery in your Jeep key fob, start by removing the back cover of the fob.

There are usually two small screws or snaps holding the cover in place. Once the back cover is removed, you’ll see the battery inside. Carefully remove the old battery and replace it with a new one.

Make sure that the new battery is installed correctly before putting the back cover back on. Once everything is put back together, test out your key fob to make sure it’s working properly.