How to Move a Toilet

If you’re planning on moving a toilet, there are a few things you need to keep in mind. First, you’ll need to turn off the water supply to the toilet. Next, flush the toilet to empty out the tank.

Then, use a plunger to dislodge any remaining water in the bowl. Finally, unscrew the bolts that hold the toilet to the floor and lift it up.

• Turn off the water to the toilet: There is usually a shut-off valve located behind or near the toilet
• Disconnect the water supply line from the tank: Use an adjustable wrench to remove the flexible supply line from the threaded shank on the bottom of the tank
• Drain the tank by holding down the flush lever: This will empty most of the water out of tank and into bowl
• Remove any remaining water in tank with a sponge: Sponge out any small amount of water that’s left in bottom of tank
• Unscrew and remove two bolts that hold tank to bowl: These are located at base of where tank meets bowl, use a socket wrench to remove them 6
• Carefully lift Tank from Bowl and set aside: Be careful not to damage either piece as you separate them 7
• Place new wax ring onto flange at bottom of bowl 8 Screw new bolts (and washers) into place, hand tight 9 Set Tank back onto Bowl being careful not to dislodge wax ring 10 Reconnect Water Supply Line 11 Turn on Water Supply Valve 12 Test for leaks by flushing toilet

Credit: www.mrrooter.ca

How Do You Move a Toilet by Yourself?

If you’re planning on moving a toilet by yourself, there are a few things you’ll need to keep in mind. First, make sure that the new location for the toilet is properly prepared. This means having the flooring and subflooring completely level and sturdy enough to support the weight of the toilet.

You’ll also need to have the proper plumbing connections in place before you move the toilet. Once everything is ready, it’s time to start moving the toilet. The first step is to disconnect the water supply line from the wall.

Next, flush the toilet to empty out all of the water inside. Once that’s done, you can unscrew the bolts that hold down the toilet bowl to the floor. Carefully lift up on the bowl and set it aside.

Now it’s time to focus on movingthe actual tank. Again, start by disconnectingthe water supply line fromthe wall. Then remove any nuts or bolts holding downthe tanktoilet bowl combo unit tot he floor.

With another person’s help, slowly tip upthe entire unit and carryit overto your desired location. Set it down gently and beginre-assemblingeverything accordingtothe manufacturer’s instructions or a professional plumber’s guidance if necessary..

How Much Does It Cost to Move the Location of a Toilet?

It costs an average of $370 to move the location of a toilet. This price includes the cost of materials, labor, and permits. The cost will vary depending on the size and type of toilet you have, as well as the complexity of the job.

If you need to move electrical wiring or plumbing pipes, it will be more expensive than if your bathroom is already set up for a new location. Permits may also add to the cost.

Can You Move a Toilet in a Bathroom?

If you’re planning on doing a bathroom renovation, one of the first questions you’ll need to answer is whether or not you can move your toilet. The good news is that in most cases, toilets can be moved relatively easily. However, there are a few things you’ll need to take into account before starting any work.

First, you’ll need to determine where your new toilet will go. This will largely be determined by the existing layout of your bathroom and the plumbing lines. Once you have a general idea of where the new toilet will go, you can start to figure out how to move the old one.

In most cases, toilets are connected to a sewage line via a large pipe called a soil stack. This pipe runs vertically from the floor up through your ceiling (if you have an upstairs bathroom) and connects to the sewer line outside your home. In order to move your toilet, you’ll need to disconnect it from this soil stack and then reconnect it at the new location.

This might sound like a daunting task but don’t worry – as long as you have some basic plumbing knowledge (or know someone who does), it’s actually quite straightforward. Once disconnected, simply carry your toilet over to its new location and then reconnect it using flexible hoses or PVC pipes (depending on what type of connection your home has). It’s important that everything is properly sealed and tightened so that there are no leaks – otherwise you could end up with a big mess on your hands!

Overall, moving a toilet isn’t too difficult but there are definitely some things you need to take into account before getting started. By following these tips, you can be sure that everything will go smoothly and that your new bathroom layout will be just perfect!

How To Relocate Toilet & Plumbing Pt 1

How to Move a Toilet to Install Flooring

If you’re looking to install new flooring in your bathroom, one of the first things you’ll need to do is move the toilet out of the way. This may seem like a daunting task, but with a little patience and some careful planning, it can be done relatively easily. Before you get started, you’ll need to gather a few supplies.

You’ll need a putty knife, a utility knife, a hacksaw, pliers, and a screwdriver. You’ll also need something to prop up the toilet while you work – either a stack of old newspapers or a couple of buckets will do the trick. Once you have everything gathered together, follow these steps:

1. Turn off the water supply to your toilet by shutting off the valve behind it. Flush the toilet to empty out any remaining water in the bowl and tank. 2. Use your putty knife to loosen the caulk around the base of the toilet.

If there’s any adhesive holding down the vinyl flooring around the toilet base, use your utility knife to score it so that it can be peeled away more easily later on. 3. Disconnect any plumbing lines running to and from your toilet (typically just a water supply line and a waste line). Use pliers to remove any retaining nuts or bolts holding down these lines.

If necessary, use your hacksaw to cut through any metal straps securing these lines in place. 4 With all of the connections loose, lift up on your toilet until it comes free from its moorings (be careful not to drop it!). Place it upside-down on your prepared surface so that you can access its underside more easily.

Can a Toilet Be Moved 6 Inches

If you’re thinking about moving your toilet, there are a few things you should know first. For starters, can a toilet be moved 6 inches? The answer is yes, but it’s not as simple as just picking up the bowl and placing it in a new spot.

There are drainage issues to consider, as well as the fact that most toilets are bolted to the floor. So, while it is possible to move a toilet, it’s best to leave this job to the professionals. Now that we’ve answered your question, “Can a toilet be moved 6 inches?”, we hope you have all the information you need to make an informed decision about your bathroom renovation.

How to Move a Toilet Drain

One of the most common DIY plumbing projects is moving a toilet drain. This is usually necessary when remodeling a bathroom or when relocating a toilet to a new location. While it may seem like a daunting task, moving a toilet drain is actually quite simple and can be done in just a few steps.

First, you’ll need to turn off the water supply to the toilet and flush the tank to empty it out. Next, remove the bolts that secure the toilet to the floor and lift it up. Be careful not to damage the porcelain as you do this.

With the toilet removed, you’ll be able to access the drain pipe. Next, use a hacksaw to cut through the old drain pipe where it meets the floor flange. Once that’s done, you can install your new drain pipe by attaching it to the floor flange with screws or PVC glue.

Make sure everything is tight and secure before turning on the water supply and testing your work by flushing the toilet several times. That’s all there is to moving a toilet drain! By following these simple steps, you can easily complete this project yourself without having to call in a professional plumber.

How Far Can You Move a Toilet from the Stack

When it comes to moving a toilet, there is no one-size-fits-all answer. The distance your toilet can be moved from the stack will depend on a number of factors, including the size and layout of your bathroom, the type of toilet you have, and whether or not you need to make any modifications to the existing plumbing. If you have a standard bathroom layout, you should be able to move your toilet up to 6 inches from the stack.

This will allow you to install a new flooring surface or make other changes in the bathroom without having to move the entire stack. If you have a larger bathroom, you may be able to move your toilet up to 12 inches from the stack. However, if you have a smaller bathroom, you may only be able to move your toilet 3-4 inches from the stack.

The type of toilet you have will also impact how far it can be moved from the stack. If you have a gravity flush toilet, it can typically be moved further away from the stack than a pressure assisted flush toilet. This is because gravity toilets rely on gravity to function properly, so they can be installed at different heights.

Pressure assisted toilets require more water pressure to function properly, so they must be installed at a minimum height above the sewer line. If your goal is simply to move your toilet closer or further away from the wall in order to create more space in your bathroom, then there are no major modifications that need to be made to your existing plumbing. However, if you are planning on moving your toilet significantly further away from the stack (more than 12 inches), then you will need to replumb part of your system in order for everythingto work correctly.

This is generally not recommended for novice do-it-yourselfers as it can be complicated and expensive if done incorrectly.

Is It Easier to Move a Toilet Or a Shower

If you’re planning a bathroom renovation, you may be wondering whether it’s easier to move a toilet or a shower. Here’s a look at the pros and cons of each option to help you make your decision: Toilet:

Pros: Toilets are typically much smaller and lighter than showers, so they’re generally easier to move. You also won’t have to worry about moving any plumbing lines when you relocate a toilet. Cons: If your new bathroom layout requires the toilet to be located in a different spot than the existing one, you’ll need to hire a professional plumber to install new drainage lines.

This can add significant expense and time to your project. Shower: Pros: Showers are usually larger than toilets, so if you have the space, they can provide a more luxurious feel to your bathroom.

And since most showers are installed against an exterior wall, there’s often no need to move any plumbing lines when relocating them.

How to Move a Toilet Closer to the Wall

If you’re looking to move a toilet closer to the wall, there are a few things you’ll need to do. First, you’ll need to turn off the water supply to the toilet. Next, you’ll need to flush the toilet and hold down the handle to empty out as much water from the bowl as possible.

Once the bowl is emptied, you can unscrew the bolts that hold the toilet in place and carefully lift it up. Move it over to your desired location and then screw it back in place. Finally, turn on the water supply and flush the toilet again to fill up the bowl.

Can You Move a Toilet to a Shower Drain

If you’re considering moving your toilet to a shower drain, there are a few things you need to know first. For starters, you’ll need to make sure that the new location of the toilet is in close proximity to the sewer line. This is important because it will ensure that the toilet can properly flush.

Additionally, you’ll want to make sure that there’s enough space around the new location for the tank and bowl. And finally, you’ll need to have a professional plumber install the new fixtures.

How to Move a Toilet Drain in Concrete

If you need to move your toilet drain in concrete, there are a few things you need to do. First, mark the area where the new drain will go. Then, use a chisel and hammer to break up the concrete around the old drain.

Be careful not to damage the sewer pipe. Next, remove the old drain and clean out any debris from the hole. Now, install the new drain following the instructions that came with it.

Finally, patch up the hole around the new drain with fresh concrete.

Conclusion

If you need to move a toilet, there are a few things you’ll need to do. First, shut off the water supply to the toilet. Then, flush the toilet to empty out the bowl.

Next, disconnect the water supply line from the back of the toilet. Finally, remove the bolts that hold the toilet to the floor and lift it up. Toilet moving can be a tricky business, but with these tips, you’ll be able to do it like a pro!