If you have a clogged urinal, you may be able to clear it with a plunger. But if that doesn’t work, you may need to snake the urinal. This can be a messy job, but it’s not difficult.
M12™ TRAPSNAKE™ 4' Urinal Auger Demonstration
- Find the source of the blockage
- This is usually a result of built-up deposits of calcium, rust, and urine scale
- Attach the snake to the proper size drill bit
- The most common size for urinals is 3/8-inch (9
- 5 mm)
- Slowly insert the snake into the drain until you feel resistance
- Rotate the snake clockwise and counterclockwise as you push it further down the drainpipe
- Continue until you feel that the blockage has been cleared
- Remove the snake from the drainpipe and flush the urinal with water to check for proper drainage
How to Dissolve Urine Crystals in Urinals
If your business has urinals, then you know that keeping them clean can be a challenge. Over time, urine crystals can build up in the pipes and create an unpleasant smell. Not to mention, it can be unsightly for customers and employees alike.
But there is a way to dissolve these crystals and keep your urinals smelling fresh and looking clean. Here’s how: The first step is to identify the source of the problem.
If you see urine crystals on the surface of the urinal, then they are most likely coming from the drain pipe. In order to dissolve them, you will need to pour a cup of white vinegar into the drain and let it sit for 15 minutes. After 15 minutes, flush the urinal with hot water to rinse away any residue.
If you don’t see any crystals on the surface of the urinal but notice an unpleasant smell, then chances are they have built up inside the pipes. In this case, you will need to remove the trap from under the urinal (this is where all of the water drains out). Once you have removed it, clean it thoroughly with white vinegar before putting it back in place.
Finally, pour a gallon of hot water down each drainpipe to flush away any remaining crystals or debris. By following these simple steps, you can dissolve urine crystals quickly and easily – keeping your business smelling fresh and looking its best!
What is the Best Way to Unclog a Urinal?
There are a few ways to unclog a urinal, but the best way is to use a plunger. First, make sure that there is enough water in the urinal so that the plunger can create suction. Next, place the plunger over the drain and push and pull the plunger up and down.
You may need to do this a few times before the clog is dislodged. If you don’t have a plunger, you can try using a wire hanger or a plumbers’ snake.
Can You Use a Snake to Unclog Urinal?
If you have a clogged urinal, you may be wondering if you can use a snake to unclog it. The answer is yes! A snake can be a helpful tool to unclog your urinal.
Here’s how to do it: 1. Remove the cap from the urinal and flush it to clear any debris that may be blocking the drain. 2. Feed the snake into the drain until you feel resistance.
3. Apply pressure to the handle of the snake and turn it clockwise as you push it further into the drain. Continue doing this until you feel the blockage give way and water begins to flow through again. 4. Pull the snake out of the drain and flush the urinal one more time to clear any residual debris.
How Does a Urinal Get Clogged?
When a urinal gets clogged, it is usually because there is something blocking the drainage hole. This can be anything from a small piece of debris to a buildup of sediment or mineral deposits. If the blockage is small, you may be able to clear it out with a plunger or plumbers’ snake.
However, if the blockage is larger, you will likely need to call a professional plumber to clear it for you.
Can Drano Be Used in Urinals?
Although Drano is not specifically designed for use in urinals, it can be used to help unclog and clean them. To use Drano in a urinal, simply pour it into the bowl and let it sit for 15 minutes before flushing. For best results, you may need to repeat this process a few times.
Can You Snake a Urinal?
If you’ve ever had a clogged urinal, you know how frustrating it can be. But did you know that there’s an easy way to unclog it without calling a plumber?
All you need is a toilet snake! To use a toilet snake, simply insert the coil into the urinal and turn it clockwise. The snake will break up the clog and clear the drain.
If your urinal is particularly stubborn, you may need to repeat this process a few times. So next time your urinal is clogged, don’t reach for the phone – reach for a toilet snake!