How Much Coal Does a Coal Generator Use Satisfactory

Satisfactory is a game that allows players to mine coal and use it to generate power. Coal generators are one of the most popular methods of generating power in Satisfactory. However, many players are unsure of how much coal a coal generator actually uses.

In this article, we will take a look at how much coal a coal generator uses in Satisfactory.

A coal generator in Satisfactory consumes approximately 1.8 tonnes of coal per minute to produce 75 MW of power. This means that a single coal generator can provide enough power for approximately 4,320 houses. If all of the homes in the United States were powered by coal generators, it would take approximately 740 million tonnes of coal to do so.

100% Efficient Coal Generator Basics [SATISFACTORY GUIDE]

Coal Generator Setup Satisfactory

A coal generator is one of the most essential buildings in Satisfactory. It provides power for your base, and without it, you won’t be able to progress very far. Here’s a guide on how to set up your own coal generator so that you can get started on your factory adventure!

The first thing you’ll need is a power pole. Place this near where you want your coal generator to go. Then, connect it to your power pole using wires.

You’ll also need to build a small platform for the generator itself – just four concrete foundations will do. Now place your coal generator on the platform and connect it to the power pole with more wires. The final step is to add fuel to the generator – in this case, coal.

Right-click on the coal deposit and select “Mine Coal”. This will give you 50 pieces of coal, which is enough to get started. Just dump them into the top of the machine and hit the “Start” button!

Yourcoal generator should now be up and running smoothly!

How Much Coal Does a Coal Generator Use Satisfactory


How Much Water Does a Coal Generator Use Satisfactory?

A coal generator uses water to produce steam, which turns the turbine that generates electricity. The amount of water required depends on the type and size of the coal plant. A typical coal power plant with a capacity of 1,000 megawatts (MW) requires around 20 million gallons (75,700 cubic meters) of water per day to operate.

How Much Coal Does a Pure Node Produce?

A pure node produces 1 coal every 4 minutes.

What is Max Consumption Satisfactory?

When it comes to electric vehicles, there are a variety of different factors that come into play when determining how much power you need. One of the biggest factors is your driving habits. If you do a lot of stop-and-go driving or live in an area with a lot of hills, you’ll need more power than someone who drives on the highway or in flat areas.

Another factor to consider is the size and weight of your vehicle. Heavier vehicles will require more power to move, so if you have a large SUV or truck, you’ll need a higher max consumption level. Finally, climate also plays a role in how much power you’ll need from your EV.

If you live in a cold climate and do a lot of winter driving, you’ll likely need more power to heat up the cabin and maintain battery life. In hot climates, meanwhile, extra power may be needed to keep the air conditioning running. So what’s the max consumption level that’s considered satisfactory?

It really depends on your specific needs and situation. However, most experts agree that around 200 watts per mile is a good starting point for most drivers. This means that if you’re driving 30 miles per day, you should aim for around 6 kilowatts (kW) of total power consumption.

Of course, this is just a general guideline – your actual needs may be higher or lower depending on the factors mentioned above.

How Much Coal Does a Power Plant Use?

A typical coal-fired power plant uses about 1.1 million short tons of coal per year. This amounts to about 39 percent of the coal used in the United States each year. The average power plant produces enough electricity for about 600,000 homes.


In the game Satisfactory, players are able to build a coal generator to produce power. But how much coal does this generator use? According to one player, a coal generator will use up approximately 180 pieces of coal per minute.

This means that a single generator will use up about 10,800 pieces of coal in an hour, and259,200 pieces of coal in a day. However, it is worth noting that the amount of power that a coal generator produces can be increased by upgrading it.

Similar Posts